Scuff Marks

Scuff marks on playground slides, climber walls, etc. are a never-ending battle when it comes to maintaining a clean look. Most are caused by tennis shoes and sandals; they are generally light in color but easy to remove.  If the playground happens to be at a church or private school where dark, hard sole shoes are the norm, the problem becomes more challenging.

 

Playground Rescue breaks down the primary cause and gives you an easy DIY solution to keep things looking good in an inexpensive way.

 

First: High Temperatures

  • HDPE plastic is the primary substrate of choice in playground manufacturing. These plastics can easily reach 150 degrees or more when in direct sun.
  • Pour in place rubber safety flooring, rubber mulch, or even wood mulch chips can also reach 160 degrees in direct sun.
  • Asphalt can exceed 170 degrees.

 

Second: Melting Shoes

  • Rubber treads/ outsoles (aka – shoe bottoms) Natural or synthetic melt between 250-300 degrees but become soft and tacky when exposed continuously to 115 degrees plus surfaces. This is the root of the scuff mark problem. When kids go down the slides they usually dig in their heels to either propel or slow their decent, thus leaving scuff marks. This still occurs even when a shade structure is present. Failure to maintain a regular cleaning/ removal of the scuff marks leaves you with a rough looking playground.

 

The Easy DIY Fix

Cleaning Erasers (aka melamine sponges) work extremely well to remove scuff marks without dulling the finish. We prefer using generic brands because none last very long and are much cheaper. Most start to tear apart after about ten minutes of use so be prepared to use several. Be sure to keep the pad wet while using. Spraying WD-40 on the wet eraser helps to remove the scuffs even easier.

Keep your playgrounds

CLEAN – HEALTHY – SAFE

Never Replace Faded Playgrounds Again!

Banner